Healthy Easy Install Red Oak Color SPC Flooring

Healthy Easy Install Red Oak Color SPC Flooring

Product Description

Traditional Spc Flooring has good machinability, can be nailed, planed, sawed, drilled and painted, the installation is simple, the construction is convenient, does not need the complex construction technology, saves the installation time and the expense.
Traditional Spc Flooring shall be pushed outward from the inside of the room. The floor shall be constructed in the direction required by the design, and those not required by the design shall be constructed in the smooth direction. Corridor, porch and other parts shall be constructed along the walking direction. When the room is more than 8 square meters, a gap junction with a width to height ratio of 1:1 shall be reserved, and the gap junction shall be covered with transition gusset plate to reserve expansion joints.

Application Area

Traditional SPC Flooring is a revolutionary progress of floor materials, which has become the most suitable floor materials for residential use. Jiamei SPC floor integrates the advantages of wood floor and ceramic tile - warmth, comfort, waterproof, wear-resistant, long life and easy installation. It can be laid in the areas where traditional wood floor is laid, such as bedrooms, living rooms, etc., and in the areas where traditional wood floor cannot be paved, such as kitchens, balconies, washrooms.

Manufacturing Structure

Main quality data of Jiamei SPC high-end floor

NO.	Items	Standards
1	thickness tolerance	0.05mm
2	density	1.9~2.1g/cm³
3	Shrinkage rate	≤0.1%（80℃ 6H）
4	warping	≤0.5mm/m
5	Perpendicularity straightness	≤400mm Scope≤0.25mm ≥400mm Scope≤0.35mm
6	Non-slip index	≥0.30mm
7	Lock clearance	≤0.10mm
8	Lock pull force	Normal temperature 23℃ 5mm＞13-15kgs/5cm 4.2mm＞12kgs/5cm ＞15-18kgs/5cm （V-lock for short side）
9	Light fastness	≥6
10	Thermal conductivity	0.25W/(m·℃)
11	Stripping force	≥50N/cm²

Product Performance

First: Common Quality

Scratch resistance: scratch with the end face of the coin, leaving no trace.

Stain resistance: marker pen is easy to wipe without mark

Burn resistant: ignite a cigarette and place it for 3 minutes. There is no trace on the surface.

Second: Enhanced Quality

On the basis of the first one, a kind of reinforced wear-resistant floor is introduced, which can bear the rolling and scalding of cigarettes, and has stronger wear-resistant force for the sand of sole and floor scraping.

Third: Antibacterial Quality

In the case of all kinds of properties, the antibacterial coating is added. Stone Plastic Composite Flooring can inhibit E. coli, Staphylococcus aureus and other common bacteria, and effectively isolate the growth of bacteria. SPC Flooring With IXPE is suitable for kindergartens, nursing homes, schools, families and other public occasions.

Installation Method

1. Put the convex of plate B tilt into the groove of plate A, lock and lay flat;
2. After leveling, the spacing between plate B and plate C is about 2-3mm, forming a parallel line;
3. Lift up the plates A and B at the same time (with the ground at a 45 degree angle;
4. Push plate B towards plate C until it is tight;
5. Flatten plate A and plate B with the palm of hands. But do not press too hard against the floor;
6. After assembly, the floor will be flat and seamless. If the floor is uneven or has gaps, gently lift at a 10-30 degree angle and lock it. After locking, the floor will be automatically leveled.

Product Concept

Contact us if you need more details on Red Oak Color SPC Flooring. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Easy Install Flooring、Healthy SPC Flooring. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : SPC Flooring > Traditional SPC Flooring